A caravan trip can go sideways before you have even reached the highway. A flat battery, an overloaded rear boot or a loose coupling can turn an exciting departure into a stressful start. Knowing how to prepare a caravan properly gives you more confidence on the road and helps protect the people travelling with you.
Preparation is not about chasing a perfect checklist for its own sake. It is about making sure your van is safe, legal, comfortable and ready for the type of trip you are taking – whether that is a long lap around Australia, a week by the coast or a few nights away with the grandkids.
How to prepare a caravan before you leave
Start your preparation a few days before departure, rather than trying to do everything on the driveway that morning. It gives you time to book a repair, replace a worn part or rethink what you are carrying. It also makes packing far less rushed.
Walk slowly around the outside of the caravan first. Look for obvious damage, loose trim, cracked seals, open hatches and anything that may have shifted since the last trip. Pay close attention to the roof line, awning, windows, storage doors and number plate. A small gap in a seal may not matter for a dry overnight trip, but it can become an expensive water issue after hours of rain.
Inside, check cupboards, drawers and the fridge are secure. Road vibration finds every loose latch. Store heavy items low and close to the caravan axle where possible, and avoid loading all the weight into the rear boot. It is tempting to use every spare cupboard, particularly before a longer holiday, but an overloaded van handles differently and can become unsafe quickly.
Check weights before adding the last few items
Weight is one of the most important parts of caravan preparation, and it is often misunderstood. Your caravan has limits for its tare mass, aggregate trailer mass (ATM), gross vehicle mass (GVM), gross combination mass (GCM) and towball download. All of these figures need to work together.
The practical rule is simple: do not guess. Water, food, clothing, recovery gear, portable generators, bikes and camping furniture add up faster than most owners expect. A full water tank alone can add a significant amount of weight. Your tow vehicle also needs to carry its share, including passengers, accessories and the towball weight transferred onto the vehicle.
If you are close to your limits, take the caravan and tow vehicle to a public weighbridge in travelling condition. That means full fuel, the people and gear you normally carry, and any water you expect to have on board. Weighing the rig provides clarity that bathroom scales and estimates cannot.
Inspect tyres, brakes and wheel bearings
Your caravan tyres may look fine while the van is parked, but age matters as much as tread depth. Check the sidewalls for cracking, bulges and cuts, and confirm the tyres are inflated to the pressure recommended for the loaded caravan. Do the same for the spare tyre. A spare hidden under the chassis is easy to forget until you need it.
Check that wheel nuts are tightened to the manufacturer’s specified torque, especially if wheels have recently been removed or tyres changed. If you are heading away for an extended trip, make sure the wheel brace, jack and any wheel lock key are accessible and suitable for the caravan’s weight.
Test the electric brakes before you get onto a busy road. With a brake controller fitted, you should feel the caravan braking smoothly and in proportion to the tow vehicle. If it pulls, shudders, locks up or feels unresponsive, have it inspected. Wheel bearings, brake magnets and brake wiring need regular attention, particularly after long distances, corrugated roads or periods sitting idle.
Set up the towing connection carefully
A secure connection between the tow vehicle and caravan is non-negotiable. Inspect the coupling for wear, dirt or damage, then make sure it is fully engaged and locked onto the towball or hitch. Check the safety chains are correctly fitted, crossed where required by the coupling instructions, and have enough length for turning without dragging on the road.
Connect the breakaway cable directly to a suitable point on the tow vehicle, not to the safety chains. Test the trailer plug and confirm the brake lights, indicators, tail-lights and reversing lights are working. It is worth having someone stand behind the van while you test each function.
Before moving off, raise and secure the jockey wheel, retract stabiliser legs and double-check the handbrake is released. If you use towing mirrors, fit and adjust them before leaving the driveway. You need a clear view along both sides of the caravan and of traffic approaching from behind.
Test power, gas and water systems
A night away is far more enjoyable when the basic systems work as expected. Check your house battery charge, solar input and 240V connection if you are staying at powered sites. Test interior lights, the water pump, fridge, air-conditioner and any charging points you rely on.
Gas deserves particular care. Confirm cylinders are secured upright, in date and turned off while travelling. Inspect hoses and connections for wear. If you can smell gas or suspect a leak, do not use a flame to investigate it. Turn off the supply, ventilate the area and arrange a qualified gas fitter to inspect the system.
Fill your fresh water tanks only when it suits your weight plan. For a short trip to a caravan park, travelling with less water may reduce weight and fuel use. For remote travel, extra water may be essential. Check the water pump, drains and hot water system before departure, and make sure grey water arrangements meet the rules of the places you plan to visit.
Pack for access, not just capacity
The best packing system is one that lets you find essential gear without emptying half the caravan. Keep your first-night items together: bedding, chargers, toiletries, dinner supplies, a torch and camp chairs. Put levelling ramps, wheel chocks, power leads and the jockey wheel handle where you can reach them as soon as you pull into a site.
A compact roadside kit should be easy to access too. Include a tyre pressure gauge, basic tools, gloves, torch, tape, spare fuses, first-aid kit and emergency triangles. Remote travellers may also need recovery equipment, extra drinking water and a communication plan that does not rely entirely on mobile coverage.
Secure loose items in the shower, kitchen and wardrobe. Close roof hatches and windows, lock external storage compartments and make sure the awning is fully rolled in. A forgotten awning strap or open hatch can cause major damage within a few kilometres.
Plan the first day realistically
The first towing day is not the day to prove how many kilometres you can cover. Allow time for slower acceleration, longer braking distances, fuel stops and breaks. If you are new to towing, choose an easy first route and avoid arriving at an unfamiliar caravan park after dark.
Check your route for low bridges, steep grades, roadworks and fuel availability. The shortest route is not always the best route for a caravan. On longer journeys, stop after the first 30 to 50 kilometres for a quick walk-around. Feel the wheel hubs carefully for unusual heat, inspect the coupling and chains, and check that nothing has come loose inside or out.
Give yourself a final departure check
Just before you leave, take one slow lap around the full rig. Look under the caravan, check every door and hatch, confirm lights are working and make sure no cables, steps or hoses are left connected. It is a simple habit that catches a surprising number of problems.
A well-prepared caravan gives you the freedom to focus on the good part: the open road, the quiet stopovers and the people sharing the trip with you. Take the extra ten minutes before departure. It is often the difference between starting your holiday with confidence and starting it on the side of the road.


